APNA-370

The APNA-370 continuously monitors atmospheric NO, NO2 and NOxconcentrations using a cross-flow modulated semi decompression chemiluminescence method. The APNA-370 employs an independent, internal dry-method sampling device to achieve the highest levels of sensitivity and accuracy. The dry method, due to its minimal maintenance requirements and capability of continuous monitoring and instantaneous analysis of gas in its unaltered state, has been a preferred method for monitoring the atmospheric pollution.

Description

The APNA-370 uses a combination of the dual cross flow modulation type chemiluminescence principle and the referential calculation method.
This gives it the advantages of the single-detector method plus the ability to do continuous measurements of NOX, NO, and NO2. The design gives great stability and extremely high sensitivity (0.1 ppm F.S.)

Standard equipment includes a drier unit with an automatic recycle function to provide dry ambient air as the ozone source. This makes long-term continuous measurements possible.

The detector uses a silicon photodiode sensor to reduce size and prolong working life.

All the necessary features are built right into a single rack-sized unit, including a reference-gas generator, an ozone-source drier unit, an ozone decomposer, and a sampling pump. No supplemental gas is required.

Specifications

Principle

Cross flow modulation type, reduced pressure chemiluminescence (CLD)

Application

NO2, NO and NOX in ambient air

Range

Standard ranges: 0-0.1/0.2/0.5/1.0 ppm; auto range ~ manual range selectable;
can be operated by remote switching.
Optional (measurable) ranges: 4 ranges selectable from 0-10 ppm, within 10 times range ratio;
auto range ~ manual range selectable; can be operated by remote switching.

Repeatability

±1.0% of F.S.

Linearity

±1.0% of F.S.

Sample gas flow rate

Approx. 0.8L/min

Indication

Measured value, range, alarm, maintenance screen

Alarms

During AIC, zero calibration error, span calibration error, temperature error in converter, etc.

On-screen messages are available in four languages

English, German, French, and Japanese.

Input/output

• 0-1 V/0-10 V/4-20 mA, to be specified (2 systems: either (1) momentary value and integrated or (2) moving average value)
• Contact input/output
• RS-232C

Power

100/110/115/120/220/230/240 VAC, 50/60 Hz (to be specified)

Dimensions

430(W) x 550(D) x 221(H) mm

Mass

Approx. 20 kg,

Related products

    Environment

    PH meter HP-200

    One-touch calibration function Realizes gentle measurement by combination with lead-free ORP electrode

    • Improved single-touch calibration for greater ease of use
    • Calibration history display
    • Extensive interfaces (2-channel transmission output, RS-485 compatible, 6-relay output)
    • Control output (upper and lower limits ON/OFF and duty control in a shared time and a zone)
    • New pH electrode lineup
    (0 reviews)
  • Environment

    APSA-370/CU-1

    Ambient Hydrogen Sulfide Monitor

    APSA-370/CU-1 Ambient H2S monitor measures SO2 converted H2S through oxidation catalyst based on Ultra Violet Fluorescence. In order to reduce measurement error by water concentration fluctuatin in ambient, humidifier is set at sample line. It enables long-term stability according to stabilizing catalytic reaction.

    • Monitor H2S with high sensitivity range in ambient air continuously.
    • Set humidifier at sample line to satbilize catalytic reaction.
    (0 reviews)
    Environment

    APNA-370/CU-2 Ambient Ammonium Monitor

    APNA-370/CU-2 Ambient Ammonium Monitor measures increased nitrogen oxide (NOx) raected through oxide catalyst treatment as Ammonia (NH3) concentration with chemiluminescent (CLD) method. HORIBA’s original Cross-flow modulation method ensures long-term stability and reliable measuring value with 5ppb for min. detectable sensitivity.

    (0 reviews)