Code: CL-14554

▪Discharge testing for full insight into battery capacity
▪Enhanced safety features including spark free connection and
emergency safety fuse
▪Ability to test the battery without disconnecting it from the system
▪High discharge capacity shortens the test time
▪A complete stand-alone discharge test system

1-4 days Delivery
100% Original and quality
Extended Warranty


The TORKEL 900 is the fourth generation in the series of Megger’s
trusted battery discharge test systems. Discharge testing is the only
test method that provides a comprehensive insight into battery capacity,
and is therefore an essential part of vigorous battery maintenance

Tests can be conducted at constant current, constant power, constant
resistance or in accordance with a pre-selected load profile. Together
with the cell voltage logger, BVM, now connected directly to the
TORKEL 900, it becomes a complete stand-alone discharge test

The TORKEL is connected to the battery, the discharge current and the
alarm levels (voltage, capacity, time) are set. After starting the
discharge TORKEL keeps the current constant at the preset level.
When the voltage drops to a level slightly above the final voltage,

TORKEL issues an alarm. If the voltage drops so low that there is a risk
for deep discharging the battery, TORKEL shuts down the test. All

values are stored in TORKEL and can easily be transferred via an USB-
stick to a PC for evaluation.

Testing can be carried out without disconnecting the battery from the
equipment it serves. Via a DC clamp-on ammeter, TORKEL measures
total battery current while regulating it at a constant level. Furthermore,
the high discharge capacity of TORKEL gives the opportunity to shorten
the test time. Discharging can take place at up to 220 A, and if higher
current is needed, two or more TORKEL units or extra load units, TXL,
can be linked together.

Additional information




Black, Silver


Accessories, Car Lights




There are no reviews yet.

Be the first to review “TORKEL 900”

Your email address will not be published. Required fields are marked *

You may also like…

  • Electrical


    • Air Gap Capacitive Sensors(4 to 16 sensors)
    • Sensor Signal Conditioners
    • Sync Sensor (1 sensor)
    • Continuous Monitoring Instrument
    • Data Management Software
    • Processes the acquired signals in real time
    • Detects the various machine modes of operation:– Stationary–Run up– Normal operation– Transient– Coast down

    • Determines alarm conditions and sends alerts to the plant SCADA system
    • Communicates with the plant SCADA system
    • Transfers condition data to the Data Management Software

    Measuring Ranges Available
    • 3 mm to 15 mm
    • 5 mm to 25 mm
    • 10 mm to 50 mm

    (0 reviews)