Extended Warranty
Showing 28–36 of 133 results
-
Combustion monitoringHORIBA CEMS Continuous Emission Monitoring System
CEMS, the “Environmental Eye” for Source Emissions
A Continuous Emission Monitoring System (CEMS) is an integrated system to measure fuel flow, dust, and concentrations of air pollutants such as SO2, NOx, CO, CO2, THC and O2 in accordance with the applicable regulations for the emission source.
(0 reviews) -
Ambient Air Pollution analyzersHORIBA APMC-370 Air Pollution Multi-gas Calibrator
Multigas Calibrator for AP Analyzers
Dilution of gases with high accuracy and precision requires high quality MFC’s, especially for high dilution ratios and ranges. Consequently HORIBA’s APMC-370 is equipped with digital MFC’s. These MFC’s are factory calibrated, optional also with a special Polynomial Calibration. HORIBA Europe‘s APMC-370 is designed to calibrate gas analyzers manually, remotely controlled or automatically. It is installed in air pollution monitoring stations for quality assurance in the laboratory and also in the production of gas analyzers.
A special feature of HORIBA’s APMC-370 is the big size touch screen panel, for ease of operation. Characteristic of the operation of HORIBA’s APMC-370 is the intuitive, simple and user friendly menu (for instance control of flow rate: µg/m³, mg/m³, ppb, ppm, automatic cycles etc.) Via the touch screen it is e.g. possible to enter span gas concentrations or to start automatic routines like multi point calibration cycles.
(0 reviews) -
Ambient Air Pollution analyzersHORIBA GA-370 Trace Gas Monitor
For monitoring quality control of manufactured high-purity gases at air separation and semiconductor plants
GA-370 provides constant, ultrahigh-sensitivity and high-precision monitoring of trace impurities (CO, CO2 and CH4) for quality control at gas manufacturing facilities.
(0 reviews) -
Ambient Air Pollution analyzersHORIBA PX-375 Continuous Particulate Monitor with X-ray Fluorescence
Continuous elemental and particulate mass analysis with automatic sampling
There has been a growing concern regarding particulate matter (PM) pollution and its effects on health. For effective preventative measures, the determination of source PM concentration is extremely important. Therefore, indication of PM and elemental concentrations is critical. The PX-375 analyzer employs automatic sampling, continuous on-line PM quantitative and qualitative analysis for rapid air pollution measurements.
(0 reviews) -
Ambient Air Pollution analyzersHORIBA AP-370 series Air Pollution Monitor
Precise, Reliable and Easy to Maintain
(0 reviews) -
Ambient Air Pollution analyzersHORIBA AQMS Air Quality Monitoring System
AQMS, the doctor for “Human Health”
An Air Quality Monitoring Station (AQMS) is a system that measures metrological parameters such as wind speed, wind direction, rainfall, radiation, temperature, barometric pressure and ambient parameters. The AQMS also integrates a series of ambient analyzers to monitor the concentration of air pollutants (such as SO2, NOx, CO, O3, THC, PM, etc.), continuously. HORIBA also provides mobile monitoring stations that can be used to monitor ambient conditions at multiple sites.(0 reviews) -
Dust monitoringDURAG D-RC 120 Automatic sampling device for gravimetric dust measurements
The D-RC 120 is an automatic sampling device for gravimetric dust measurements to adjust or calibrate dust monitors for the measurement of dust in mg/m3.
The D-RC 120 extracts isokinetically a partial gas stream from the measuring gas duct whereas the extraction is controlled fully automatically. The partial gas stream is sucked through a filter in which the contained dust is deposited. The dust concentration is determined by weighing the filter before and after the extraction.
The design of the D-RC 120 meets the requirements of DIN EN 13284-1 and US-EPA Method 5.
DOWNLOADS
(0 reviews) -
Dust monitoringDURAG D-R 820 F Extractive scattered light analyser
Extractive dust monitor for wet sample gas to monitor low to medium dust concentrations.
(0 reviews) -
Dust monitoringDURAG D-R 320 Dust Monitor
The new scattered light dust monitor to detect lowest to medium dust concentrations in dry flue and process gas.
The D-R 320 is based on the back-scattered light principle. Thereby the light of a red laser diode illuminates the dust particles in the measuring volume of the flue gas duct. The light scattered backward by these particles is detected and evaluated.
A unique feature of the D-R 320 is the automatic background light compensation with means of a patented optical system with dual detector. This allows for an easy and quick Installation without any adjustment. A light trap is not required.
DOWNLOADS
(0 reviews)
